TM 9-2320-366-34-4
NOTE
Use matchmarks as reference.
(14) Tighten seven bolts (6), on side with tabs, an additional
1/4 turn.
(15) Tighten seven bolts (6), on side without tabs, an
additional 1/4 turn.
(16) Mount magnetic base and dial indicator to rear of
cylinder block (2).
(17) Align dial indicator with crankshaft (4) and adjust for zero
reading on dial.
(18) Rotate crankshaft (4) slowly.
(19) Indicated end play must be 0.003-0.009 in. (0.008-0.023
cm).
(20) Remove magnetic base and dial indicator.
f. Follow-On Maintenance.
(1) Install flywheel housing (para 3-11).
(2) Install flexplate assembly (para 3-10).
(3) Install oil pump (para 3-17).
(4) Install crankshaft front seal (para 3-7).
(5) Install front gear housing and idler gear (para 20-8).
(6) Install camshaft and bearings (para 20-7).
(7) Install cylinder head (para 3-6).
(8) Demount engine from maintenance stand (para 20-2).
End of Task.
20-39
