TM 9-2320-366-34-4
(4) Remove two bolts (7) and washers (8) from oil tube (9).
(5) Remove oil tube (9) and gasket (10) from center side
cover (11). Discard gasket.
(6) Remove two bolts (12) and washers (13) from oil
manifold (14).
(7) Remove oil manifold (14) and preformed packing (15)
from engine (16). Discard preformed packing.
(8) Remove tee fitting (17) from oil manifold (14).
(9) Install engine stand bracket on engine (16) with six bolts
(18).
WARNING
Engine weighs approximately 1500 lbs (681
kgs). Attach a suitable lifting device prior to
mounting on maintenance stand. Failure to
comply may result in injury to personnel or
damage to equipment.
NOTE
Steps (10) and (11) require the aid of an
assistant.
(10) Remove engine (16) from engine transport stand.
(11) Install engine (16) on engine maintenance stand with
four bolts (19) and nuts (20).
20-3
