TM 9-2320-366-34-4
(43) Position two lanyards (36), washers (37), and screws
(38) to top holes of storage brackets (32).
(43.1) Tighten two screws (35 and 38) to 71-89 lb-in. (8-10
N·m).
(44) Connect two lanyards (36) to quick-release pins (28).
(45) Attach lower platform (27) to two brackets (23) with
straight pins (25) and cotter pins (26).
(46) Attach lower platform (27) to storage brackets (32) with
two quick-release pins (28).
NOTE
Perform steps (47) through (60) on all
vehicles except M1093/M1094.
(47) Remove six screws (39) and washers (40) from defrost
cover (41).
(48) Remove defrost cover (41) from vehicle.
(49) Measure and mark center line of defrost cover (41) at 7
19/64 in. (185 mm) from either of the center defrost
cover mounting holes (42).
(50) Cut out marked 7 19/64 in. (185 mm) center line on
defrost cover (41).
Change 1
19-9
