TM 9-2320-366-34-316-93. POWER TAKE-OFF (PTO) REPLACEMENT/REPAIR (CONT)NOTEPerform steps (2) through (5) on PTOAssembly (P/N 276XMF-JX-D5XK).(2) Install two bearings (3) in input gear (4).(3) Install two thrust washers (5) and input gear (4) inhousing (2).(4) Install preformed packing (6) on idler shaft (7).CAUTIONEnsure flat side of shaft is lined up to makeproper contact. Failure to comply may result indamage to equipment.(5) Install idler shaft (7) in housing (2).NOTEPerform steps (5.1) and (5.2) on PTOAssembly (P/N 12378814-001).(5.1) Install preformed packing (7.1) on plug (9).(5.2) Position plug (9) in housing (2).NOTEPerform steps (6) and (7) on PTO Assembly(P/N 276XMF-JX-D5XK).(6) Install two preformed packings (8) on plug (9).(7) Position washer (10) and plug (9) in housing (2).(8) Tighten plug (9) to 97-106 lb-in. (11-16 N m).CAUTIONInput gear should turn freely and have noside-to-side movement. Failure to complymay result in damage to equipment.(9) Turn input gear (4) in housing (2).16-578.2 Change 1
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
