TM 9-2320-366-34-3
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing.
To avoid injury or death, keep away from
open fire and use in a well-ventilated area.
If adhesive, solvent, or sealing compound
gets on skin or clothing, wash immediately
with soap and water. Failure to comply may
result in injury to personnel.
(37) Apply adhesive to threads of cap screw (51).
(38) Position piston (52) on piston rod (53) with cap screw
(51).
(39) Position piston rod (53) in vise.
(40) Tighten cap screw (51) to 75 lb-in. (8 N·m).
(41) Install inner seal (54) in flange (55).
(42) Position flange (55) and spacer (56) on piston assembly
(57).
(43) Install piston assembly (57) in stripper bolt (46).
(44) Position seal (58), preformed packing (59), and retaining
plates (60) on upper control valve assembly (27) with
two screws (61).
(45) Install spacer (62), retaining plate (63), preformed
packing (64), and seal (65) on solenoid assembly (66).
(46) Position solenoid assembly (66) in upper control valve
assembly (27).
Change 1
16-505
