TM 9-2320-366-34-3
16-82. M1089 LINEAR DIRECTIONAL CONTROL VALVE REPLACEMENT/REPAIR
(CONT)
(9) Start engine (TM 9-2320-366-10-1).
(10) Position PTO switch to ON (TM 9-2320-366-10-1).
(11) Set engine speed to 1250-1450 rpm (TM 9-2320-366-10-
1).
(12) Perform STE/ICE-R test #51 (TM 9-4910-571-12&P).
(13) Position and hold LH main winch control lever to IN (TM
9-2320-366-10-1).
(14) Note reading on STE/ICE-R.
(15) If pressure is not 2950-3050, perform steps (16) through
(22).
(16) Remove cap (9) from setscrew (10).
(17) Loosen lock nut (11) on setscrew (10).
(18) Perform steps (9) through (13).
16-500.2
Change 1
