TM 9-2320-366-34-3
16-78. M1089 STIFFLEG ASSEMBLY REPAIR (CONT)
CAUTION
Cap or plug hydraulic hoses and fittings to
prevent contamination of hydraulic system.
Failure to comply may result in damage to
equipment.
NOTE
Left and right side pay-out hydraulic motors are
removed the same way. Left side shown.
(2) Position drain pan under pay-out hydraulic motor (3).
(3) Disconnect two hoses (4) from pay-out hydraulic motor
(3).
(4) Remove two bolts (5), washers (6), and pay-out
hydraulic motor (3) from spooler weldment (7).
NOTE
Left and right side stiffleg assemblies are
disassembled the same way. Left side shown.
(5) Remove two lock pins (8) from sandshoe (9).
(6) Remove two self-locking nuts (10), six washers (11), two
screws (12), and sandshoe (9) from stiffleg (13). Discard
self-locking nuts.
(7) Remove two self-locking nuts (14), four washers (15),
two screws (16), and gladhand bracket (17) from spooler
weldment (7). Discard self-locking nuts.
16-468
