TM 9-2320-366-34-3
16-67. 30K WINCH VALVE MANIFOLD ASSEMBLY REPLACEMENT/REPAIR
This task covers:
a. Removal
b. Disassembly
c. Cleaning/Inspection
d. Assembly
e. Installation
INITIAL SETUP
Equipment Conditions
Disconnect batteries (TM 9-2320-366-20-3).
Air tanks drained (TM 9-2320-366-10-1).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Soldering and Brazing Outfit, Resistance
Heating (Item 66, Appendix B)
Heater, Gun Type, Electric (Item 34, Appendix
B)
Materials/Parts
Rag, Wiping (Item 60, Appendix C)
Dispenser, Pressure Sensitive Adhesive Tape (Item 30,
Appendix C)
Solder (Item 82, Appendix C)
Insulation, Sleeving, Electrical (Item 42, Appendix C)
Tape, Antiseizing (Item 85, Appendix C)
Nut, Self-Locking (2) (Item 180, Appendix F)
Nut, Self-Locking (2) (Item 177, Appendix F)
Lockwasher (8) (Item 146, Appendix F)
Personnel Required
(2)
a. Removal.
(1) Remove two self-locking nuts (1), washers (2), washers
(3), and screws (4) from top cover (5). Discard self-
locking nuts.
(2) Remove eight screws (6), lockwashers (7), washers (8),
and top cover (5) from control panel (9).
Discard
lockwashers.
16-401
