TM 9-2320-366-34-2
13-37. M1085 SUBFRAME RAIL REPLACEMENT (CONT)
b. Installation.
WARNING
Subframe rail weighs approximately 280
lbs (127 kgs). Attach a suitable lifting
device prior to installation.
Failure to
comply may result in injury to personnel
or damage to equipment.
NOTE
• Left and right side subframe rails are installed
the same way. Right side shown.
• Step (1) requires the aid of two assistants.
(1) Position subframe rail (1) on vehicle.
CAUTION
Ensure subframe rail flange is fully in contact
with main frame rail flange. Failure to comply
may result in damage to equipment.
NOTE
Steps (2) through (11) requires the aid of an
assistant.
(2) Position three bolts (2) and self-locking nuts (3) in
bracket (4).
(3) Tighten three self-locking nuts (3) to 210-225 lb-ft (285-
305 N·m).
13-362
