TM 9-2320-366-34-2
13-31. M1089 FRAME RAIL REPLACEMENT (CONT)
INITIAL SETUP (CONT)
Materials/Parts
Nut, Self-locking (2) (Item 208, Appendix F) (LH side)
Nut, Self-locking (6) (Item 214, Appendix F) (LH side)
Nut, Self-locking (4) (Item 214, Appendix F) (RH side)
Nut, Self-locking (2) (Item 202, Appendix F) (LH side)
Nut, Self-locking (Item 202, Appendix F) (RH side)
Bolt (Item 10, Appendix F)
Bolt (4) (Item 7, Appendix F)
Materials/Parts (Cont)
Bolt (2) (Item 17, Appendix F) (LH side)
Bolt (4) (Item 17, Appendix F) (RH side)
Bolt (4) (Item 18, Appendix F)
Bolt (2) (Item 19, Appendix F)
Nut, Self-locking (19) (Item 211, Appendix F) (LH
side)
Nut, Self-locking (21) (Item 211, Appendix F) (RH
side)
Bolt (6) (Item 16, Appendix F)
Personnel Required
(2)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. LH Removal.
(1) Remove six self-locking nuts (1), bolts (2), and clamps
(3) from frame rail (4). Discard self-locking nuts.
(2) Remove two self-locking nuts (5), bolts (6), and clamps
(7) from frame rail (4). Discard self-locking nuts.
CAUTION
When removing bolts, continuous removal of
collars is mandatory. Failure to comply will
result in seizing of collar to bolt.
NOTE
Steps (3) through (10) require the aid of an
assistant.
(3) Remove collar (8), bolt (9), and bracket (10) from frame
rail (4). Discard collar and bolt.
13-305
