TM 9-2320-366-34-2
13-25. M1093 FRAME RAIL REPLACEMENT (CONT)
INITIAL SETUP (CONT)
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B)
Wrench Set, Socket (Item 84, Appendix B)
Wrench, Torque, 0-150 lb-in. (Item 91, Appendix B)
Sling, Cargo (2) (Item 56, Appendix B)
Wrench, Impact, Electric (Item 88, Appendix B)
Socket Set, Impact (Item 58, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B)
Socket Wrench, Socket Set (Item 59, Appendix B)
Wrench Set, Socket (Item 85, Appendix B)
Materials/Parts
Bolt (4) (Item 17, Appendix F) (RH side)
Bolt (2) (Item 17, Appendix F) (LH side)
Bolt (Item 10, Appendix F)
Bolt (4) (Item 7, Appendix F)
Bolt (2) (Item 19, Appendix F)
Nut, Self-locking (23) (Item 211, Appendix F)
(RH side)
Nut, Self-locking (22) (Item 211, Appendix F) (LH
side)
Bolt (4) (Item 18, Appendix F)
Bolt (6) (Item 16, Appendix F)
Personnel Required
(2)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris.
Failure to
comply may result in injury to personnel.
a. LH Removal.
(1) Remove six self-locking nuts (1), bolts (2), and clamps
(3) from frame rail (4). Discard self-locking nuts.
(2) Remove three self-locking nuts (5), bolts (6), and clamps
(7) from frame rail (4). Discard self-locking nuts.
(3) Remove two self-locking nuts (8), bolts (9), and brackets
(10) from frame rail (4). Discard self-locking nuts.
13-210
