TM 9-2320-366-34-2
3-3. ENGINE ASSEMBLY REPLACEMENT (CONT)
NOTE
Perform steps (99) through (100.1) on vehicle
serial number 1478 and higher.
(99) Remove plug (171) from flywheel housing (168).
NOTE
Step (100) requires the aid of an assistant.
During removal of flexplate bolts, access each
flexplate bolt by turning alternator pulley through
a series of short arcs.
(100) Remove six bolts (172) from flexplate (170).
(100.1) Install plug (171) in flywheel housing (168).
WARNING
Position floor jack under transmission
control valve module for support. Failure
to comply may result in injury to
personnel or damage to equipment.
(101) Remove 12 bolts (173) and washers (174) from flywheel
housing (168).
(101.1) Disconnect hose (174.1) from fitting (174.2).
3-28
Change 1