TM 9-2320-366-34-2
(60) Disconnect connector P41 (103) from water temperature
transducer (104).
NOTE
Perform steps (61) through (78) on vehicles
equipped with 100 AMP alternator.
(61) Remove screw (105), lockwasher (106), washer (107),
terminal lugs TL5 (108), and TL8 (109) from alternator
(110). Discard lockwasher.
(62) Position washer (107), lockwasher (106), and screw
(105) on alternator (110).
(63) Lift boot from terminal lug TL60 (111).
(64) Remove self-locking nut (112), washer (113), insulation
washer (114), and 12v terminal lug TL60 (111) from
alternator (110). Discard self-locking nut.
(65) Position insulation washer (114), washer (113), and self-
locking nut (112) on alternator (110).
Change 1
3-23
