TM 9-2320-366-34-2
13-19. M1084 FRAME PLATE REPLACEMENT
This task covers:
a. LH Removal
b. LH Installation
c. RH Removal
d. RH Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Material Handling Crane (MHC) removed (para 16-2).
Crane brackets removed (para 13-8).
Rear axle bogie shaft removed (para 10-4).
Rear torque rods removed (para 14-5).
Resilient mount and mechanical stops removed (TM 9-
2320-366-20-4).
Rear axle rear shock absorber brackets removed (para 14-
9).
Rear stabilizer mounting bracket removed (para 14-10).
Rear bumper removed (para 13-9).
Rear fender and mudflaps removed (TM 9-2320-366-20-4).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B)
Wrench Set, Socket (Item 84, Appendix B)
Wrench, Torque, 0-150 lb-in. (Item 91, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B)
Socket Set, Socket Wrench (Item 59, Appendix B)
Wrench, Impact, Electric (Item 88, Appendix B)
Socket Set, Impact (Item 58, Appendix B)
Wrench Set, Socket (Item 85, Appendix B)
Materials/Parts
Nut, Self-locking (2) (Item 173, Appendix F)
(RH side)
Nut, Self-locking (3) (Item 173, Appendix F)
(LH side)
Nut, Self-locking (2) (Item 202, Appendix F)
Lockwasher (Item 166, Appendix F)
Nut, Self-locking (8) (Item 212, Appendix F)
Bolt (33) (Item 2, Appendix F) (LH side)
Nut, Self-locking (33) (Item 204, Appendix F)
(LH side)
Bolt (34) (Item 2, Appendix F) (RH side)
Nut, Self-locking (34) (Item 204, Appendix F)
(RH side)
Bolt (2) (Item 10, Appendix F)
Bolt (13) (Item 7, Appendix F)
Nut, Self-locking (17) (Item 211, Appendix F)
Personnel Required
(2)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris.
Failure to
comply may result in injury to personnel.
a. LH Removal.
(1) Remove two self-locking nuts (1), bolts (2), and brackets
(3) from frame plate (4). Discard self-locking nuts.
13-136
