TM 9-2320-366-34-2
WARNING
Adhesive sealant MIL-S-46163 can damage
your eyes. Wear safety goggles when using;
avoid contact with eyes. If sealant contacts
eyes, flush eyes with water and get
immediate medical attention.
Failure to
comply may result in injury to personnel.
(9) Apply sealing compound to threads of two bolts (9).
NOTE
Install bolts in positions noted during removal.
(10) Position maintenance leg bracket (10) on frame plate (1)
with two washers (11), bolts (9), and nuts (12).
(11) Tighten two nuts (12) to 18-22 lb-ft (24-29 N·m).
(12) Position rear torque arm bracket (13) on frame plate (1)
with eight bolts (14) and self-locking nuts (15).
(13) Tighten eight self-locking nuts (15) to 390-510 lb-ft (529-
691 N·m).
(14) Position screw (16) in frame plate (1) with lockwasher
(17) and self-locking nut (18).
(15) Tighten self-locking nut (18) to 84-108 lb-in. (10-12 N·m).
(16) Position clamp (19) and terminal lug TL92 (20) on screw
(16) with self-locking nut (21).
(17) Tighten self-locking nut (21) to 84-108 lb-in. (10-12 N·m).
13-127
