TM 9-2320-366-34-2
13-9. M1084/M1085/M1086/M1088 REAR BUMPER REPLACEMENT (CONT)
b. M1084/M1086 Installation.
NOTE
Steps (1) through (6) require the aid of an
assistant.
(1) Position rear bumper (1) on vehicle with two bolts (2)
and self-locking nuts (3).
(2) Tighten two self-locking nuts (3) to 210-225 lb-ft (285-
305 N·m).
NOTE
Left and right side of rear bumper is installed
the same way. Left side shown.
(3) Position three bolts (4) and self-locking nuts (5) in rear
bumper (1).
(4) Tighten three self-locking nuts (5) to 210-225 lb-ft (285-
305 N·m).
(5) Position three bolts (6) and self-locking nuts (7) in rear
bumper (1).
(6) Tighten three self-locking nuts (7) to 210-225 lb-ft (285-
305 N·m).
(7) Perform steps (3) through (6) on right side of rear
bumper.
13-60
