TM 9-2320-366-34-2
9-3. FRONT AXLE SHAFT AND SEALS REPLACEMENT
This task covers:
a. Removal
b. Cleaning/Inspection
c. Installation
d. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Wheel bearing/CTIS seal removed (TM 9-2320-
366-
20-4).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Puller, Mechanical (Item 53, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Gloves, Rubber (Item 26, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B)
Respirator, Air Filtering (Item 54, Appendix B)
Driver, Front Axle Shaft Seal (Item 48, Appendix D)
Materials/Parts
Rag, Wiping (Item 60, Appendix C)
Seal, Plain Encased (2) (Item 395, Appendix F)
Dispenser, Pressure Sensitive Adhesive Tape
(Item 30, Appendix C)
Solvent, Dry Cleaning (Item 83, Appendix C)
Grease, Automotive and Artillery (Item 35,
Appendix C)
Personnel Required
(2)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. Removal.
NOTE
Tag brake hoses and connection points prior
to disconnecting.
(1) Disconnect two brake hoses (1) from front brake air
chamber (2).
9-11
