TM 9-2320-366-34-2
7-13. TRANSMISSION INTERNAL WIRING HARNESS REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Condition
Control valve module removed (para 7-10).
Control valve module strainer removed (para 7-14).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Tools and Special Tools (Cont)
Wrench, Torque, 0-150 lb-in. (Item 91, Appendix
B)
Wrench Set, Socket (Item 85, Appendix B)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape
(Item 30, Appendix C)
a. Removal.
NOTE
Cover will not be installed on transmission
serial number 6510088864 and higher or if
internal wiring harness P/N 29229474 is
installed.
(1) Remove four bolts (1) and cover plate (2) from
stationary clutch valve body (3).
7-90
Change 1
