TM 9-2320-366-34-2
7-4. TRANSMISSION ASSEMBLY REPLACEMENT (USUAL CONDITIONS) (CONT)
NOTE
Perform steps (34) through (41) on M1089.
(34) Position three hoses (38) on three stage hydraulic
pump (39).
(35) Tighten three hoses (38) to 79-88 lb-ft (107-119 N·m).
WARNING
Three stage hydraulic pump weighs
approximately 70 lbs (32 Kgs). Attach
suitable lifting device prior to installation.
Failure to comply may result in injury to
personnel or damage to equipment.
NOTE
Step (36) requires the aid of an assistant.
(36) Install three stage hydraulic pump (39) on PTO (31)
with four washers (40) and nuts (41).
(37) Remove two nuts (42) and washers (43) from three
stage hydraulic pump (39).
(38) Position support bracket (44) on three stage hydraulic
pump (39) with two washers (43) and nuts (42).
(39) Position three bolts (45) in support bracket (44).
(40) Tighten three bolts (45) to 66-81 lb-ft (90-110 N·m).
(41) Tighten two nuts (42) to 180-200 lb-ft (243-297 N·m) in
50 lb-ft (68 N·m) increments.
7-32
Change 1
