TM 9-2320-366-34-2
NOTE
Perform steps (39) and (40) on vehicle
serial number 1478 and higher.
(39) Remove plug (58) from flywheel housing (54).
NOTE
Step (40) requires the aid of an assistant.
During removal of flexplate bolts, access each
flexplate bolt by turning alternator pulley
through a series of short arcs.
(40) Remove six bolts (59) from flexplate (57).
NOTE
Perform steps (41) and (42) on models
M1084, M1086, M1090, and M1094.
(41) Remove bolt (60) and bracket (61) from transfer case
housing (62).
(42) Install bolt (60) in transfer case housing (62).
NOTE
The rear of transmission/differential lift has
release knob and pump handle. Rear of
transmission/differential lift will go to front of
vehicle.
(43) Install two 90-degree brackets (63) on left side of
headplate (64).
(44) Install 90-degree bracket (65) on right side of
headplate (64).
(45) Position long adapter support bar (66) on two 90-
degree brackets (63) with bolts (67).
(46) Position two bolt circle adapters (68) on long adapter
support bar (66) with two bolts (69).
Change 1
7-26.7
