TM 9-2320-366-34-2
6-7. TRANSMISSION EXTERNAL WIRING HARNESS REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Batteries disconnected (TM 9-2320-366-20-3).
Cab raised (TM 9-2320-366-10-1).
Tools and Special Tools
Wrench, Torque, 0-150 lb-in. (Item 91, Appendix
B)
Tools and Special Tools (Cont)
Goggles, Industrial (Item 28, Appendix B)
Tool Kit, Genl Mech (Item 78, Appendix B)
Wrench Set, Socket (Item 85, Appendix B)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape (Item
30, Appendix C)
Ties, Cable Plastic (Item 92, Appendix C)
Nut, Self-Locking (Item 206, Appendix F)
a. Removal.
NOTE
• Tag connectors and connection points prior to
disconnecting.
• Remove plastic cable ties as required.
(1) Disconnect transmission external harness (1) from
bulkhead receptacle J119 (2).
(2) Disconnect transmission external harness (1) from
throttle position sensor (3).
6-38
