TM 9-2320-366-34-2
(10) Lift spring (15) and install brush (16) in brush plate (12).
WARNING
Adhesives,
solvents,
and
sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area.
If
adhesive, solvent, or sealing compound
gets
on
skin
or
clothing,
wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(11) Apply sealing compound to threads of screws (17).
(12) Install screw (17) in brush plate (12).
(13) Perform steps (10) through (12) on remaining brushes.
(14) Apply sealing compound to threads of four screws (18).
(15) Install contact screw (19) on brush plate (12) with four
screws (18).
(16) Install two washers (20), insulation washer (21),
preformed packing (22), and sealing ring (23) on contact
screw (19).
Change 1
6-36.9
