TM 9-2320-366-34-2
6-3. STARTING MOTOR REPAIR (P/N M0017730MD) (CONT)
NOTE
Replace brush housing frame if continuity is
not present between pin A and B of
thermostat switch.
(8) Check continuity between pin A and pin B of thermostat
switch connector (10).
NOTE
Replace brush housing if brush holder or
brush springs fail visual inspection.
(9) Check brush holder (11) for cracks, pitting, or corrosion.
(10) Check brush springs (12) for cracks, nicks, breaks, or
distortion.
NOTE
Replace brush housing if continuity is present
between brush housing terminal and brush
housing frame.
(11) Check continuity between brush housing terminal (13)
and brush housing frame (14).
NOTE
Replace starting motor if shift housing, lever,
cams, or pin fail visual inspection.
(12) Inspect shift housing (15) for cracks, pitting, or corrosion.
(13) Inspect lever (16) for cracks, pitting, or corrosion.
(14) Inspect two cams (17) and pin (18) for cracks, pitting, or
corrosion.
6-20
