TM 9-2320-366-34-2
4-6. TURBOCHARGER REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Cab raised (TM 9-2320-366-10-1).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B)
Wrench, Torque, 0-150 lb-in. (Item 91, Appendix B)
Wrench Set, Socket (Item 85, Appendix B)
Materials/Parts
Compound, Antiseize (Item 12, Appendix C)
Materials/Parts (Cont)
Nut, Self-Locking (2) (Item 173, Appendix F)
Lockwasher (2) (Item 164, Appendix F)
Gasket (Item 33, Appendix F)
Packing, Preformed (Item 240, Appendix F)
Gasket (Item 46, Appendix F)
Ring, Seal (Item 363, Appendix F)
Packing, Preformed (Item 252, Appendix F)
Locknut, Tube Fitting (4) (Item 126, Appendix F)
Gasket (Item 43, Appendix F)
Rag, Wiping (Item 60, Appendix C)
a. Removal.
CAUTION
Ensure all openings of turbocharger are covered
with wiping rags during removal.
Failure to
comply may result in damage to equipment.
(1) Remove self-locking nut (1) from clamp (2). Discard
self-locking nut.
(2) Remove lower exhaust pipe (3) from upper exhaust pipe
(4).
(3) Remove clamp (2) from lower exhaust pipe (3).
(4) Remove two bolts (5) from exhaust pipe bracket (6).
4-24
