TM 9-2320-366-34-2
4-3. FUEL INJECTOR SYNCHRONIZATION
This task covers:
a. Fuel Injector Synchronization
b. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Valve cover removed (TM 9-2320-366-20-3).
Fuel shutoff solenoid removed (para 6-4).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Tool Kit, Intl. Comb. Eng. (TM 9-2320-366-20)
Tools and Special Tools (Cont)
Wrench, Torque, 0-60 N·m (Item 96, Appendix B)
Hammer, Hand Soft Head (Item 33, Appendix B)
Materials/Parts
Lubricating Oil, Engine (Item 49, Appendix C)
Personnel Required
(2)
a. Fuel Injector Synchronization.
CAUTION
This task must be performed when any fuel
injector is replaced. If No. 1 fuel injector is
replaced,
all
injectors
must
be
synchronized. Failure to comply may result
in damage to equipment.
Hold rocker arm assembly level when
removing
from
engine
to
prevent
disassembly. Failure to comply may result
in damage to equipment.
(1) Remove four bolts (1) from rocker arm assembly (2).
(2) Remove rocker arm assembly (2) from cylinder head (3).
(3) Apply a small amount of clean lubricating oil to top of
No. 1 fuel injector (4).
4-5
