TM 9-2320-366-34-1Change 1 2-773CONTINUITY TEST(1) Set multimeter to ohms.(2) Connect positive (+) probe of multimeterto connector P119-N.(3) Connect negative (-) probe of multimeterto connector P67-H and note reading onmultimeter.(4) If continuity is not present, replacetransmission external wiring harness(para 6-7).(5) Connect positive (+) probe of multimeterto connector P119-N.(6) Connect negative (-) probe of multimeterto all other pins in connector P119 andnote reading on multimeter.(7) Connect negative (-) probe of multimeterto ground and note reading on multimeter.(8) If continuity is present, transmissionexternal wiring harness is shorted; replacetransmission external wiring harness(para 6-7).(9) Connect connector P119 to connectorJ119.(10) Position front grille on cab with washerand screw.(11) Position two washers and screws in frontgrille.(12) Tighten screw to 48-60 lb-in. (5-7 N·m).(13) Tighten two screws to 24 lb-in. (3 N·m).
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
