TM 9-2320-366-34-1 2-674          Change 1 INITIAL SETUP   Equipment Condition     Engine shut down (TM 9-2320-366-10-1).     Batteries disconnected (TM 9-2320-366-20-3).   Tools and Special Tools     Tool Kit, Genl Mech (Item 78, Appendix B)     STE/ICE-R (Item 70, Appendix B)     Multimeter, Digital (Item 41, Appendix B)     Goggles, Industrial (Item 28, Appendix B)     Wrench, Torque, 0-200 lb-in. (Item 93, Appendix B)     Wrench Set, Socket (Item 85, Appendix B) Materials/Parts   Wire, Elect, 50 ft (Item 97, Appendix C) Personnel Required    (2) References    TM 9-4910-571-12&P WARNING       CAUTION       Read WARNING and CAUTION on following page.             KNOWN INFO                     POSSIBLE PROBLEMS                   TEST OPTIONS            Continuity Test or STE/ICE-R Test #91     REASON FOR QUESTION     Replace transmission external wiring harness (para 6-7). YES 1. NO START Circuit breaker OK. Batteries OK. WTEC III cab transmission harness OK. Faulty transmission external wiring harness. Faulty transmission adapter cable assembly. Faulty transmission internal wiring harness. Faulty A solenoid. Faulty WTEC III transmission ECU. Is continuity present from connector P119-M to connector P67-G? If continuity is not present, transmission external wiring harness is faulty. c56. WTEC III TRANSMISSION PUSHBUTTON SHIFT SELECTOR (TPSS) DISPLAYS MAIN CODE         42, 44, 45, 46, AND/OR 69 SUB CODE 12 (PRIOR TO SERIAL NUMBER 6510032369         WITH TRANSMISSION ADAPTER CABLE ASSEMBLY)