TM 9-2320-366-34-1
2-602 Change 1
Materials/Parts
Wire, Elect, 50 ft (Item 97, Appendix C)
References
TM 9-4910-571-12&P
Personnel Required
(2)
1.
WARNING
CAUTION
Read WARNING and
CAUTION on
following page.
KNOWN INFO
TEST OPTIONS
Continuity Test or
STE/ICE-R Test #91
REASON FOR QUESTION
START
Faulty transmission external
wiring harness.
Faulty transmission adapter
cable assembly.
Faulty transmission internal
wiring harness.
Faulty transmission turbine
speed sensor.
Faulty WTEC III transmission
ECU.
POSSIBLE PROBLEMS
Circuit breaker OK.
Batteries OK.
WTEC III cab transmission
harness OK.
Is continuity present from
connector P119p to
connector P67-V?
YES
Replace transmission external
wiring harness (para 6-7).
NO
If continuity is not present,
transmission external wiring
harness is faulty.
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Batteries disconnected (TM 9-2320-366-20-3).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
STE/ICE-R (Item 70, Appendix B)
Multimeter, Digital (Item 41, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Wrench, Torque, 0-200 lb-in. (Item 93, Appendix B)
Wrench Set, Socket (Item 85, Appendix B)
c49. WTEC III TRANSMISSION PUSHBUTTON SHIFT SELECTOR (TPSS) DISPLAYS MAIN CODE
22 SUB CODE 15 (PRIOR TO SERIAL NUMBER 6510032369 WITH TRANSMISSION
ADAPTER CABLE ASSEMBLY)
