TM 9-2320-366-34-1
2-558 Change 1
1.
WARNING
CAUTION
Read WARNING and
CAUTION on
following page.
START
TEST OPTIONS
Continuity Test or
STE/ICE-R Test #91
REASON FOR QUESTION
KNOWN INFO
POSSIBLE PROBLEMS
Circuit breaker OK.
Batteries OK.
WTEC II cab transmission
harness OK.
WTEC II TEPSS OK.
Is continuity present from
connector P119-h to
external wiring harness
31-pin connector pin W?
If continuity is not present,
transmission external wiring
harness is faulty.
Faulty transmission external
wiring harness.
Faulty transmission internal
wiring harness.
Faulty C3 solenoid regulator
valve.
Faulty C3 pressure switch.
Materials/Parts
Wire, Elect, 50 ft (Item 97, Appendix C)
Adapter, Straight, Pipe to Tube (Item 2.1, Appendix C)
Adapter, Straight, Tube to Boss (Item 2.2, Appendix C)
Hose Assembly, Nonmetallic (Item 40.2, Appendix C)
Personnel Required
(2)
References
TM 9-4910-571-12&P
NO
Replace transmission external
wiring harness (para 6-7).
YES
c45. WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) DISPLAYS MAIN
CODE 52 AND ANY SUB CODE (SERIAL NUMBER 6510032369 AND HIGHER)
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Batteries disconnected (TM 9-2320-366-20-3).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
STE/ICE-R (Item 70, Appendix B)
Multimeter, Digital (Item 41, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Wrench, Torque, 0-200 lb-in. (Item 93, Appendix B)
Wrench Set, Socket (Item 85, Appendix B)
