Materials/Parts   Wire, Elect, 50 ft (Item 97, Appendix C) Personnel Required     (2) References     TM 9-4910-571-12&P TM 9-2320-366-34-1 2-456          Change 1 INITIAL SETUP Equipment Condition     Engine shut down (TM 9-2320-366-10-1).     Batteries disconnected (TM 9-2320-366-20-3).   Tools and Special Tools     Tool Kit, Genl Mech (Item 78, Appendix B)     STE/ICE-R (Item 70, Appendix B)     Multimeter, Digital (Item 41, Appendix B)     Goggles, Industrial (Item 28, Appendix B)     Wrench, Torque, 0-200 lb-in. (Item 93, Appendix B) WARNING       CAUTION       Read WARNING and CAUTION on following page.             KNOWN INFO                         TEST OPTIONS            Continuity Test or STE/ICE-R Test #91 1. START        POSSIBLE PROBLEMS        Circuit breaker OK. Batteries OK. WTEC II cab transmission harness OK. Faulty transmission external wiring harness. Faulty transmission internal wiring harness. Faulty N solenoid. Faulty WTEC II TEPSS. Is continuity present from connector P119K to external wiring harness 31-pin connector pin g?     REASON FOR QUESTION     If continuity is not present, transmission external wiring harness is faulty. NO Replace transmission external wiring harness (para 6-7). YES c36. WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) DISPLAYS MAIN         CODE 41, 42, 44, 45, AND/OR 69 SUB CODE 26 (SERIAL NUMBER 6510032369 AND         HIGHER)