TM 9-2320-366-34-1
2-202 Change 1
INITIAL SETUP
Equipment Condition
Engine shut down (TM 9-2320-366-10-1).
Batteries disconnected (TM 9-2320-366-20-3).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
STE/ICE-R (Item 70, Appendix B)
Multimeter, Digital (Item 41, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Wrench, Torque, 0-200 lb-in. (Item 93, Appendix B)
Wrench Set, Socket (Item 75, Appendix B)
Materials/Parts
Wire, Elect, 50 ft (Item 97, Appendix C)
Personnel Required
(2)
References
TM 9-4910-571-12&P
c13. WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) DISPLAYS MAIN
CODE 41, 42, 44, 45, AND/OR 69 SUB CODE 12 (PRIOR TO SERIAL NUMBER
6510032369)
WARNING
CAUTION
Read WARNING and
CAUTION on
following page.
START
KNOWN INFO
TEST OPTIONS
Continuity Test or
STE/ICE-R Test #91
REASON FOR QUESTION
1.
POSSIBLE PROBLEMS
If continuity is not present,
transmission external
wiring harness is faulty.
Is continuity present from
connector P119-B to
external wiring harness
24-pin connector pin A2?
Faulty transmission external
wiring harness.
Faulty transmission internal
wiring harness.
Faulty A solenoid.
Faulty WTEC II TEPSS.
Circuit breaker OK.
Batteries OK.
WTEC II cab transmission
harness OK.
Replace transmission external
wiring harness (para 6-7).
YES
NO
