c8. WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) DISPLAYS MAIN
CODE 32 AND ANY SUB CODE (SERIAL NUMBER 6510032369 AND HIGHER)
TM 9-2320-366-34-1
2-150 Change 1
INITIAL SETUP
Equipment Condition
Engine shut down (TM 9-2320-366-10-1).
Batteries disconnected (TM 9-2320-366-20-3).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
STE/ICE-R (Item 70, Appendix B)
Multimeter, Digital (Item 41, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Wrench, Torque, 0-200 lb-in. (Item 93, Appendix B)
Wrench Set, Socket (Item 85, Appendix B)
Materials/Parts
Wire, Elect, 50 ft (Item 97, Appendix C)
Personnel Required
(2)
References
TM 9-4910-571-12&P
WARNING
CAUTION
Read WARNING and
CAUTION on
following page.
KNOWN INFO
TEST OPTIONS
Continuity Test or
STE/ICE-R Test #91
REASON FOR QUESTION
Replace transmission external
wiring harness (para 6-7).
YES
1.
NO
Is continuity present from
connector P119-h to
external wiring harness
31-pin connector pin W?
If continuity is not present,
transmission external wiring
harness is faulty.
POSSIBLE PROBLEMS
Faulty transmission external
wiring harness.
Faulty transmission internal
wiring harness.
Faulty C3 pressure switch.
Circuit breaker OK.
Batteries OK.
WTEC II cab transmission
harness OK.
WTEC II TEPSS OK.
START
