Change 1 2-141
TM 9-2320-366-34-1
CAUTION
Shut down engine immediately when test
is completed. Failure to comply may result
in damage to equipment.
SCAVENGE PUMP SUCTION TEST
(1) Place drain pan under transfer case.
(2) Disconnect scavenge pump suction hose
at transfer case.
(3) Connect batteries (TM 9-2320-366-20-3).
(4) Start engine (TM 9-2320-366-10-1).
(5) If oil drips or runs from fitting on transfer
case, replace scavenge pump assembly
(para 7-16).
(6) Shut down engine (TM 9-2320-366-10-1).
(1) Place end of hose in a cup containing
approximately one pint of oil.
(2) Start engine (TM 9-2320-366-10-1).
(3) Select neutral on WTEC II TEPSS (TM 9-
2320-366-10-1) and note if oil is
immediately sucked into hose by scavenge
pump.
(4) If oil is not immediately removed from cup,
replace scavenge pump assembly
(para 7-16).
(5) Shut down engine (TM 9-2320-366-10-1).
(6) Connect scavenge pump suction hose
to transfer case.
(7) Remove drain pan.
