CONTINUITY TEST - TM-9-2320-366-34-1

WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) DISPLAYS MAIN CODE 24 SUB CODE 12 OR 23 (SERIAL NUMBER 6510032369 AND HIGHER) (CONT) - TM-9-2320-366-34-1_249

WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) DISPLAYS MAIN CODE 24 SUB CODE 12 OR 23 (SERIAL NUMBER 6510032369 AND HIGHER) (CONT) - TM-9-2320-366-34-1_251

TM-9-2320-366-34-1 M1078 Series 2 1/2-Ton 4x4 Light Medium Tactical Vehicles (LMTV) Manual
Page Navigation
182

Change 1 2-127 TM 9-2320-366-34-1 CONTINUITY TEST (1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to internal wiring harness 31-pin connector pin N. (3) Connect negative (-) probe of multimeter to internal wiring harness 31-pin connector pin P and note reading on multimeter. (4) If continuity is not present, replace transmission internal wiring harness (para 7-13). (5) Connect positive (+) probe of multimeter to internal wiring harness 31-pin connector pin N. (6) Connect negative (-) probe of multimeter to all other pins in internal wiring harness 31-pin connector and note reading on multimeter. (7) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (8) If continuity is present, transmission internal wiring harness is shorted; replace transmission internal wiring harness (para 7-13). (9) Connect external wiring harness 31-pin connector to internal wiring harness 31-pin connector.

Privacy Statement
Press Release
Contact