c1. WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) DISPLAYS MAIN
CODE 22 SUB CODE 15 (SERIAL NUMBER 6510032369 AND HIGHER)
TM 9-2320-366-34-1
2-80 Change 1
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Batteries disconnected (TM 9-2320-366-20-3).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
STE/ICE-R (Item 70, Appendix B)
Multimeter, Digital (Item 41, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Wrench, Torque, 0-200 lb-in. (Item 93, Appendix B)
Wrench Set, Socket (Item 85, Appendix B)
Materials/Parts
Wire, Elect, 50 ft (Item 97, Appendix C)
Personnel Required
(2)
References
TM 9-4910-571-12&P
1.
WARNING
CAUTION
Read WARNING and
CAUTION on
following page.
KNOWN INFO
TEST OPTIONS
Continuity Test or
STE/ICE-R Test #91
REASON FOR QUESTION
NO
START
Is continuity present from
connector P119-p to
external wiring harness
31-pin connector pin V?
Faulty transmission external
wiring harness.
Faulty transmission internal
wiring harness.
Faulty transmission turbine
speed sensor.
Faulty WTEC II TEPSS.
POSSIBLE PROBLEMS
Circuit breaker OK.
Batteries OK.
WTEC II cab transmission
harness OK.
If continuity is not present,
transmission external wiring
harness is faulty.
YES
Replace transmission external
wiring harness (para 6-7).
