(1) Remove clip from fuel control linkage.
(2) Slide sleeve, using soft jawed pliers, into
cylinder head.
(3) Remove retaining ring and clevis pin, using
pin removal tool.
(4) Check fuel control linkage for smooth
operation.
(5) If fuel control linkage is binding, replace fuel
control linkage (para 4-7).
(6) If fuel control linkage moves freely, replace
fuel governor (para 4-9).
(7) Install valve cover (TM 9-2320-366-20-3).
(1) Remove fuel shutoff solenoid (para 6-4).
(2) Reconnect electrical leads to fuel shutoff
solenoid (para 6-4).
(3) Position master power switch to on
(TM 9-2320-366-10-1).
(4) If plunger in fuel shutoff solenoid does
not fully contract, replace fuel shutoff
solenoid (para 6-4).
(5) Install valve cover (TM 9-2320-366-20-3).
NOTE
Perform steps (6) through (8) if
plunger fully contracts.
(6) Position master power switch to off
(TM 9-2320-366-10-1).
(7) Remove electrical leads from fuel shutoff
solenoid (para 6-4).
(8) Install fuel shutoff solenoid (para 6-4).
TM 9-2320-366-34-1
Change 1 2-66.17/(2-66.18 Blank)
