TM 9-2320-366-34-1
2-6. SERVICE BEFORE OPERATION (CONT)
c. Special Service Instructions.
(1) Vehicle Body and Sheet Metal Inspection (TM 9-2320-366-10-1).
(a) Inspect body and sheet metal for evidence of damage during shipment.
(b) Check doors, latches, and hinges on compartments for proper operation.
(c) Check mounting hardware and tighten as necessary.
(2) Vehicle Cab Inspection (TM 9-2320-366-10-1).
(a) Inspect cab for evidence of damage during shipment.
(b) Inspect windshields and window glass for cracks or other damage.
(c) Check door latches, hinges, and windows for proper operation.
(d) Check seats and seatbelts mounting hardware to ensure they are securely installed and tighten as
necessary.
(e) Check operator’s seat adjustments to ensure they are functioning properly.
(3) Engine Inspection (TM 9-2320-366-10-1).
(a) Check for obstructions to cooling air flow to radiator.
(b) Remove any seals, plugs, or tape used to seal air inlets and ports on the engine during shipping.
(c) Check crankcase oil level with dipstick.
(d) Examine air cleaner element for dirty or restricted condition.
(e) Inspect engine and cooling hose connections for evidence of leakage.
(4) Transmission Inspection (TM 9-2320-366-10-1).
(a) Check fluid level with dipstick.
(b) Check external tubes and hoses for evidence of leakage.
(5) Transfer Case Inspection (TM 9-2320-366-10-1).
(a) Check level of lubricant at fill plug.
(b) Inspect lubrication pump and external hoses for evidence of leakage.
(c) Operate driveline control and observe drive power to front axle.
(d) Inspect bolts on driveline U-joints.
2-4
