Do not put connector P52R/J52 in clamp.
Failure to comply may result in disconnection
(70) Install clamp (38) on RH frame rail (39) with screw (37)
and self-locking nut (36).
Left and right clamps are installed the same
way. Right side shown.
(71) Install clamp (15) on L-bracket (16) with screw (14) and
self-locking nut (13).
(72) Perform step (71) on left side clamp.
Both EMERGENCY and SERVICE gladhand
air hoses are connected the same way. One
(73) Connect air hose (48) to reducer fitting (49).
(74) Perform step (73) on remaining air hose.