TM 9-2320-366-34-4
NOTE
Left and right rear fenders are removed the
same way. Right side shown.
(19) Removed self-locking nut (35), washer (36), resilient
mount (37), hook (38), and washer (39) from rear fender
(40).
(20) Remove two self-locking nuts (41), washers (42),
resilient mounts (43), and screws (44) from rear fender
(40).
(21) Remove two self-locking nuts (45), washers (46) screws
(47) and bracket (48) from support bracket (49).
(22) Perform steps (19) through (21) on left side rear fender.
CAUTION
When removing bolts, continuous removal of
collars is mandatory. Failure to comply will
result in seizing of collar to bolt.
NOTE
Left and right collars and bolts are removed
the same way. Right side shown.
(23) Remove collar (50) and bolt (51) from extraction tube
(52). Discard collar and bolt.
(24) Remove two collars (53) and bolts (54) from RH frame
rail (55). Discard collars and bolts.
(25) Perform steps (23) and (24) on left side collars and bolts.
Change 1
18-25