Left and right side L-brackets are removed
and installed the same way.
(72) Remove self-locking nut (102), screw (103) and clamp
(104) from L-bracket (59).
The L-bracket will be mounted with elongated
hole against the rear cross-member and the
long end of L-bracket pointing down.
(73) Install clamp (104) in small hole on bracket (59) with
screw (103) and self-locking nut (102).
Position L-bracket on rear crossmember with
long side of L-bracket facing down.
(74) Install L-bracket (59) on rear crossmember (16) with
screw (57) and self-locking nut (58).
(75) Perform steps (72) through (74) on left side L-brackets.