TM 9-2320-366-34-4
(3) Remove six self-locking nuts (5), washers (6), screws
(7), washers (8), and valve control panel (9) from
brackets (10 and 11).
(4) Remove cotter pin (12) from nut (13). Discard cotter pin.
(5) Remove nut (13) and washer (14) from pintle hook (15).
WARNING
Pintle hook weighs approximately 65 lbs
(30 kgs). Attach a suitable lifting device
prior to removal. Failure to comply may
result in injury to personnel or damage to
equipment.
(6) Remove pintle hook (15) from rear crossmember (16).
(7) Remove four self-locking nuts (17), screws (18), and
support (19) from rear crossmember (16). Discard self-
locking nuts.
Change 1
18-3