TM 9-2320-366-34-4
Figure D-7. Cab Maintenance Stand Brace Bracket Locations
h. Using straight bracket (10) as a template, mark holes and match drill 0.38 in. (0.96 cm) holes through 4 support
braces (4) and through 2 supports (6) as shown in Figure D-7.
Cab Maintenance Stand Brace Bracket
Locations.
iMake 2 B braces by securing to each end of support (6), braces (4) and straight brackets (10) using 16 bolts
(11), flat washers (13), lockwashers (14), and hex nuts (15).
j Using straight bracket (10) as a template, mark holes and match drill 0.38 in. (0.96 cm) holes through 2 support
braces (5) and through 1 support (6) as shown in Figure D-7. Cab Maintenance Stand Brace Bracket
Locations.
k. Make C brace by securing to each end of support (6), brace (5) and straight brackets (10) using 8 bolts (11), flat
washers (13), lockwashers (14), and hex nuts (15).
D-13