TM 9-2320-366-34-4
NOTE
Apply lubricating oil to preformed packings
during assembly.
(2) Install backup ring (3) and preformed packing (4) on
gland (5).
(3) Install wiper (6), rod seal (7), and wear ring (8) on gland
(5).
(4) Install piston seal (9) and back-up ring (10) on piston
(11).
NOTE
Apply lubricating oil to cylinder rod during
assembly.
(5) Install lubrication fitting (12) in cylinder rod (13).
(6) Install collar (2), gland (4), and spacer (14) on cylinder
rod (13).
(7) Install wave washer (15) and preformed packing (16) on
cylinder rod (13).
(8) Install piston (11) on cylinder rod (13).
27-7