TM 9-2320-366-34-4
(3) Install wear ring (4), buffer seal (5), and rod seal (6) in
cylinder head (7).
(4) Install back-up ring (8) and preformed packing (9) on
cylinder head (7).
(5) Install cylinder head (7) and spacer (10) on rod (2).
(6) Install two back-up rings (11) and preformed packing
(12) on rod (2).
(7) Install piston (13) on rod (2) with setscrew (14).
(8) Install seal (15) and guide lock ring (16) on piston (13).
26-71