TM 9-2320-366-34-4
(3) Inspect rod (2) for pitting or corrosion.
(4) Inspect piston (3) for pitting or corrosion.
(5) Inspect cylinder head (4) for pitting or corrosion.
(6) Inspect two bushings (5) for pitting, corrosion, or
evidence of binding.
c. Assembly.
NOTE
Apply lubricating oil to all parts during
assembly.
(1) Install wear ring (1), buffer seal (2), and rod seal (3) in
cylinder head (4).
(2) Install back-up ring (5) and preformed packing (6) on
cylinder head (4).
26-57