TM 9-2320-366-34-4
(6) Install two back-up rings (12) and preformed packing
(13) in piston (14).
(7) Install seal assembly (15) on piston (14).
(8) Position rod (9) in vise.
(9) Install piston (14) on rod (9) with setscrew (16).
(10) Install seal assembly (15) on piston (14).
(11) Remove rod (9) from vise.
NOTE
Step (12) requires the aid of an assistant.
(12) Position cylinder barrel (17) in a vise.
(13) Install rod (9) in cylinder barrel (17).
(14) Install cylinder head (4) in cylinder barrel (17)
26-51