TM 9-2320-366-34-4
26-8. M1084/M1086 ERECTION CYLINDER REPAIR (CONT)
(6) Inspect two bushings (5) for pitting, corrosion, or
evidence of binding.
c. Assembly.
NOTE
Apply lubricating oil to all parts during
assembly.
(1) Install two wear rings (1), buffer seal (2), and rod seal (3)
in cylinder head (4).
(2) Install back-up ring (5) and preformed packing (6) on
cylinder head (4).
(3) Install wiper ring (7) in retaining ring (8).
(4) Install cylinder head (4) and retaining ring (8) on rod (9).
(5) Install rod end (10) on rod (9) with set screw (11).
26-50