21-12. P4 PLANETARY CARRIER ASSEMBLY REPAIR
This task covers:
d. Follow-On Maintenance
Transfer case module disassembled (para 22-3).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Gloves, Rubber (Item 26, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Wrench, Torque, 0-300 lb-in. (Item 95, Appendix B)
Caliper, Vernier (Item 11, Appendix B)
Adapter, Socket Wrench, (Item 3, Appendix B)
Tools and Special Tools (Cont)
Socket Wrench Attachment, Screwdriver (TM 9-
Rag, Wiping (Item 60, Appendix C)
Grease, Automotive and Artillery (Item 35,
Solvent, Dry Cleaning (Item 83, Appendix C)
Setscrew (3) (Item 412, Appendix F)
(1) Remove setscrew (1), spindle (2), pinion gear (3), and
two thrust washers (4) from planetary carrier (5).
(2) Remove 18 roller bearings (6) from pinion gear (3).
(3) Perform steps (1) and (2) on remaining two pinion gears.
Dry Cleaning Solvent (P-D-680) is TOXIC and flammable. Wear protective goggles and
gloves; use only in well ventilated area; avoid contact with skin, eyes, and clothes, and do
not breathe vapors. Keep away from heat or flame. Never smoke when using solvent; the
flashpoint for Type I Dry Cleaning Solvent is 100°F (38°C) and for Type II is 130°F (50°C).
Failure to comply may result in serious injury or death to personnel.
If personnel become dizzy while using cleaning solvent, immediately get fresh air and
medical help. If dry cleaning solvent contacts skin or clothes, flush with cold water. If dry
cleaning solvent contacts eyes, immediately flush eyes with water and get immediate medical
attention. Failure to comply may result in injury to personnel.
(1) Clean all metal parts with dry cleaning solvent.