21-8. MAIN SHAFT MODULE REPAIR
This task covers:
d. Follow-On Maintenance
Transmission disassembled (para 21-2).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Tools and Special Tools (Cont)
Goggles, Industrial (Item 26, Appendix B)
Caliper, Vernier (Item 11, Appendix B)
Rag, Wiping (Item 60, Appendix C)
Use care when removing retaining rings.
Retaining rings are under tension and can
act as projectiles when released. Failure to
comply may result in injury to personnel.
(1) Remove retaining ring (1) from main shaft (2).
(2) Remove thrust bearing (3), gear (4), spacer (5), gear (6),
and thrust bearing (7) from main shaft (2).