(2) Remove 14 bolts (3) and washers (4) from seven
crankshaft main bearing caps (5).
Retain main bearing half in each
crankshaft bearing cap until inspection is
Tag main bearing caps prior to removal.
(3) Remove seven crankshaft main bearing caps (5) from
cylinder block (1).
Crankshaft weighs approximately 130 lbs (59
kgs). Attach a suitable lifting device prior to
removal. Failure to comply may result in
injury to personnel or damage to equipment.
Step (4) requires the aid of an assistant.
(4) Remove crankshaft (2) from cylinder block (1).